Adam Vorisek

If fans will scan into the AirLynk, but no fans are showing up on the Dual Control, the following will need to be confirmed:   Software Version: Press the Settings button in the upper-right corner ...

Below you will find information on the most common fault codes we see on the Airvolution and AirLegacy lines utilizing Yaskawa V1000 VFDs. Click on any of the links in the VFD Readout column to tak...

If a VFD display is blank, not lit up, or if the VFD is otherwise non-functional with no fault code, confirm the following:   1. Verify that the breaker is turned on. 2. Ensure that the breaker is ...

If you have a fan that is perceived as noisy, start troubleshooting by answering the following questions.  Describe the noise you are hearing (grinding, whining, clicking, frequency, etc.) When wa...

To utilize the fire alarm feature on our current fan lines, you will want to tie your normally-closed relay into the orange and orange/white wires of the CAT5 for most fan models*. This is typicall...

In the course of troubleshooting a Controller 30, MacroAir Technical Support may determine that it is necessary to perform a software update on the device. This process is to only be performed with...

Below you will find the wiring diagram for the AirLynk. The AirLynk is wired from the factory and it is strongly recommended to not modify the wiring inside of the AirLynk enclosure. The power supp...

Below you will find wiring diagrams for the Controller 30 and Dual Controller. Note that while the Controller 30 and Dual Controller look physically identical, the wiring and programming are differ...

Below you will find the latest installation manual for the AVD5. The file can be viewed and downloaded here.      

Below you will find the spec sheet for the AVD5. The sheet can be viewed and downloaded here.