Adam Vorisek

A SC fault (fault code 5 on the touchscreen) is a short circuit fault. The VFD has detected a short circuit on the output. Below are some possible causes.   1. The motor cable is not properly wired...

Some AirVolution and AirLegacy fans have two yellow wires with connectors on the end. These wires are not used by MacroAir and can be ignored. You only need to utilize the wires that are on the pos...

MacroAir's business hours are Monday through Friday 7AM-4PM Pacific Standard Time, excluding holidays. Technical Support is available 6AM-4PM PST. We are available for all of your inquiries during ...

Blade bolts for XL blades used on every HVLS model except the AVD370 should be torqued to 23 ft-lbs. There is no specific torque spec for the XS blades used on the 370. Torque specs for other hardw...

Standard touchscreens, Controller 4s, and Controller 30s are standalone products and cannot interface with a AirLynk/BMS. If you want to interface our fans with a BMS and have a single local contro...

The Lincoln Street fan has 10,155-15,150 CFM of airflow depending on the diameter.

An rr fault (fault code 15 on the touchscreen) is a dynamic braking resistor fault. This is an error with internal VFD components. It is possible that a power cycle can fix this (leave the incoming...

Prices for many of our fans can be found on the product pages here. For fan cost and other pricing questions that are not found on our website, please contact our Sales team at (866)668-3247 option...

If you are running your fan in the reverse direction, MacroAir limits the speed of the reverse function to 50% compared to the forward direction and older remotes. This was done for efficiency and ...

Network controllers should be ordered at the time of the fan order to ensure compatibility. It may be possible to convert fans on individual controllers to a Controller 4, Controller 30, AirLynk (f...